How to choose aluminum veneer for exterior wall? Professional production of aluminum veneer manufacturers teach you to distinguish, the key to look at the following aspects:

1, aluminum veneer surface treatment method

The different surface treatment processes of aluminum veneer are directly related to the service life of aluminum veneer. The ranking of aluminum veneer surface treatment process is: fluorocarbon paint three coating → fluorocarbon paint two coating → fluorocarbon powder spraying → wood grain thermal transfer printing imitation stone spraying → ordinary polyester powder spraying, the better the quality of the sorting, of course, the more expensive. It is recommended to use fluorocarbon paint spraying or fluorocarbon powder spraying, which has strong weather resistance and corrosion resistance, and can be used for 15-20 years without discoloration or fading. The indoor aluminum veneer can be selected according to the actual situation with a cost-effective surface treatment process.

2. Check whether the manufacturer has cut corners

Carefully check how the aluminum veneer surface treatment process is doing, and now there are many aluminum veneer manufacturers in order to attract customers, at lower than the cost price to quote, cut corners, shoddy to muddle through, the use of non-standard aluminum plate thickness, in order to meet customer requirements of product thickness, spray primer when spraying thick. This approach makes the primer can not be deeply cured on the surface of the aluminum plate, and it is easy to fade and discolor over time. When we see the price of aluminum veneer is much lower than the general price on the market, we must be careful, after all, cheap no good goods, you blindly lower the price, aluminum veneer manufacturers will try to lower the cost to make profits, and finally hurt the customer himself.

3, the correct choice of aluminum veneer manufacturers for cooperation

For the larger aluminum veneer project, Xiaobian suggests that you must go to the aluminum veneer manufacturer to see if the factory is big, whether the machine is advanced, and whether the production process meets the requirements of the drawing. You know what? The advantages and disadvantages of the production process directly affect the service life of aluminum veneer products, which is also the most easily ignored place by customers.

4. Check the raw material of aluminum veneer

According to the national standard of aluminum veneer, the decorative aluminum plate is distinguished by grade, and the advantages and disadvantages of the aluminum veneer material of the curtain wall can generally be judged from the knocking sound, and the sound of the good aluminum alloy plate is crisp and loud. When you purchase aluminum veneer, you can use your hand to try the sound of aluminum veneer, there is no big problem with the sound, and there is certainly no problem with the plate. Architectural decoration aluminum veneer commonly used materials are mainly 1100, 3003, 5005, etc., of course, the higher the aluminum content, the better, the aluminum content is too high, the hardness of the aluminum plate is not enough, so the curtain wall aluminum veneer material is mostly high-quality alloy aluminum plate, adding manganese, magnesium, silicon and other metal elements to enhance the hardness of the aluminum plate.

For aluminum veneer price calculation, production process, quality identification, installation and construction technology and other issues, you can contact and consult us at any time.